Board v2 · Firmware in developmentDraft
Drawings and STEP
Status of the dimensional drawings, the enclosure STEP model and the board outline for UPAN Core.
Dimensional drawings, the enclosure STEP model and the board outline for UPAN Core will be published here together with the case. The case is still being designed around the v2 board, so we do not publish mounting dimensions yet: numbers that change later would cost you a drilled panel.
What is known today
| Item | Value |
|---|---|
| Board size | about 156 × 87 mm (v2) |
| Connections | pluggable terminals in one row along each long edge; USB-C, SMA antenna socket and the button with light pipe on the front |
| Case (first batch) | our own 3D-printed case with vents over the driver sockets |
| Mounting | 35 mm DIN rail; UPAN modules sit next to it on the same rail |
The outer dimensions of the case and the width on the rail are not final yet.
What will be published
- Dimensional drawing of UPAN Core in its case (PDF).
- STEP model of the case for your machine CAD.
- Board outline with the connector positions.
Until then, the pin order of every terminal is on the Wiring page, and the mounting advice for heat is on the Power page.